Pay in installments of $147.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 26 - Jul 31
For Your Every Summer RSVP, with Code: SUMMER15
Description
LD Systems DIO 44 4x4 Input/Output Dante interfacePart of the TICA series, the DIO 44 is a four input and output Dante interface that delivers the capabilities that audio and AV professionals really need. Equipped with four balanced mic line inputs and line outputs with four step gain settings and 24V phantom power on each input. Signal presence lights on each channel speed installation and fault finding. The DIO 44 is easy to configure from the front panel and can then be locked to prevent
Part of the TICA® series, the DIO 44 is a four input and output Dante interface that delivers the capabilities that audio and AV professionals really need. Equipped with four balanced mic/line inputs and line outputs with four-step gain settings and 24V phantom power on each input. Signal presence lights on each channel speed installation and fault-finding.
The DIO 44 is easy to configure from the front panel and can then be locked to prevent tampering.
Power from any PoE+ network switch or use the optional, external power supply. Since it comes with two Dante networked ports, you can daisy chain devices together. It also works as a PoE+ injector: if you use the external power supply, you can power one further networked device in the chain.
Its tiny form factor (142 x 43 x 221mm) and included mounting plates allow it to be installed discreetly behind screens or under tables. Alternatively, it fits into 1/3 19 inch rack. Use the optional rack tray to slot up to three TICA® series products alongside each other and build a system to your exact requirements, using minimal rack space.
Terminal block connections on the analogue inputs and outputs make wiring easy.
The perfect solution for professional installers wanting to interface into Dante equipment.
Dante Domain Manager and AES 67 compliant.
Features
- Four input and output Dante interface
- Connect microphones or line level inputs
- Four-step gain control and 24V phantom power per channel
- Terminal blocks for all analogue connections
- Signal indicators on each channel
- Use PoE or an external power supply
- Use as a PoE injector to power another networked device
- Daisy-chain Dante devices together
- Easy front panel configuration and user lock
Specifications
General
- Product type: 4x4 I/O Dante Interface
- Inputs: 4
- Input type: Switchable Balanced mic or line level
- Line outputs: 4
- Output type: Balanced line level with auto mute relay on loss of Dante/AES67 signal
- Cooling: Convection
Analogue Input Section
- Number of input connectors: 4
- Connector: 3-pin terminal block (3.81 mm)
- Mic input sensitivity: 55mV (Gain +30dB switch)
- Nominal input clipping: 20 dBu (Sine 1kHz), Gain 0dB switch
- Frequency response: 10 hz - 20 kHz ( 0,5 dB)
- THD + Noise: < 0.003% (0dB switch, 4 dBu, 20 kHz BW)
- DIM: < -90dB (+ 4 dBu)
- Input Impedance: 10 kohms (balanced)
- Crosstalk: < 105dB (20 kHz BW)
- SNR: > 112 dB (0dB switch, 20 dBu, 20 kHz BW, a-weighted)
- CMRR: > 50 dB
- High Pass Filter: 100Hz (-3dB, when +15 or +30dB is selected)
- Phantom Power (per input): + 24 VDC @ 10 mA max
- Gain: -15dB, 0dB, +15dB, +30dB
Analogue line outputs
- Number of output connectors: 4
- Line Output Connectors: 3-pin terminal block (3.81 mm)
- Max. output level: 18 dBu
- Intermodulation Distortion (SMPTE): < 0.005 % (-20 dBFS to 0 dBFS)
- THD + N: < 0.002% (10 dBu, 20 kHz BW)
- Idle Noise: > - 92 dBu
- Dynamic Range: > 103 dB (0dBFS, AES 17, CCIR-2k Weighting)
- Frequency range: 15 Hz - 20 kHz (-0,5 dB)
Dante™ Specifications
- Audio Channels: 4 inputs / 4 outputs
- Bit depth AD/DA converter: 24 bit
- Sampling frequency: 48 kHz
- System Latency: Minimum 1 ms
- Connector DANTE: 100 BASE-T RJ45
PoE (Power over Ethernet)
- Minimum PoE Requirements: PoE+ IEEE 802.3at
- PSE+ Data: Capable of powering 1 extra PD unit
Power Supply
- Input voltage: 24 V DC
- Minimum Current: 1.5 A
- Power connector: Pitch 5,08 mm terminal block (2-pin)
- Max. Power consumption: 10 W
- Idle power consumption: 7.5 W (no signal input)
- Power Consumption with Secondary Port: 22 W
- Mains Inrush Current: 1.7A @ 230V AC
- Operating temperature (non-condensing): 0°C - 40°C; < 85% humidity
- Material: Plastic Front panel, Steel chassis
- Dimensions (W x H x D) (height with rubber feet): 142 mm x 53 mm x 222 mm
- Weight: 1,04 kg
- Accessories (included): Mounting plates for surface mount applications, rubber feet, Terminal blocks for electrical connections.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy